Independent metal AM
EOS M 290 vs DMP Flex 350
Start with the differences that could affect your part. Confirm the complete configuration with each supplier.
The big difference
- DMP Flex 350 has the larger published build-space volume.
- Both use Powder bed fusion · laser powder bed fusion (LPBF).
- These specifications alone cannot tell us which machine will make a given part faster or cheaper.
Side by side
| Question | EOS M 290 | DMP Flex 350 |
|---|---|---|
| Quick description | LPBF machine; compare published build space and laser configuration below. | LPBF machine; compare published build space and laser configuration below. |
| Process | Powder bed fusion · laser powder bed fusion (LPBF) | Powder bed fusion · laser powder bed fusion (LPBF) |
| Build size | 250 x 250 x 325 mm (Z incl. build platform, application-dependent) | 275 x 275 x 420 mm (height incl. build plate) |
| Energy / lasers | 1 × 400 W | See published specifications |
| Feedstock | Metal powder | Metal powder |
| Machine status | Availability unconfirmed | Availability unconfirmed |
| Public price | Current quote required | Current quote required |
Published build-space comparison
EOS M 290250 × 250 × 325 mm
DMP Flex 350275 × 275 × 420 mm
Proportional X and Z dimensions. Depth is listed in the numbers. Nominal envelopes are not usable part space; see configuration and platform caveats below.
Build size is the maximum published physical space. Energy or laser counts describe the machine configuration; they do not prove a throughput winner.
What do these differences actually mean?
A difference may matter when your part size, material, production plan or process qualification requires it. Confirm the exact application with both suppliers; this page does not declare a winner.
What public specs cannot tell you
Real throughputYour geometry, orientation, parameters and finishing route matter.
Actual yieldPublished specs do not tell you your accepted-part rejection rate.
Total installed priceInstallation, training, service, software and options require a current quote.
Finished-part costPrinting is only one part of the complete accepted-part route.
Service qualityLocal response, parts availability and support experience need supplier validation.
Qualified application fitPublic specs cannot approve your material, parameters, tolerances or inspection plan.
EOS M 290
| Capability | Source-backed detail |
|---|---|
| EOS M 290 build volume | 250 x 250 x 325 mm (Z incl. build platform, application-dependent)OEM ↗ · Source reviewed |
| EOS M 290 laser | Yb-fiber laser; 1 x 400 WOEM ↗ · Source reviewed |
More published specifications and source notes
| Published detail | Evidence |
|---|---|
| EOS M 290 power consumption | max 8.5 kW / typical 2.4 kW; supply 1 x 32 AOEM ↗ · Source reviewed |
| EOS M 290 machine footprint | 2500 x 1300 x 2190 mm; weight approx 1250 kgOEM ↗ · Source reviewed |
| EOS M 290 optics/scan | up to 7.0 m/s scan; focus approx 100 um; 1 F-theta lensOEM ↗ · Source reviewed |
| EOS M 290 machine-level layer-thickness range | not published as a single machine range; per-material layer values published (e.g. 316L 20/40/80 um)OEM ↗ · Source reviewed |
| EOS M 290 price | No public retail price found in the cited source during the research review.OEM ↗ · Source reviewed |
| Materials — OEM scope | OEM-listed examples: AlSi10Mg, 316L, 17-4PH, IN625, IN718 and Ti64. Confirm the exact material/parameter set; this is not a universal qualification claim.OEM ↗ · OEM source checked |
| Machine weight | Approximately 1250 kg.OEM ↗ · OEM source checked |
| Manufacturer positioning | EOS presents the M 290 as a mid-sized system for qualified metal parts.OEM ↗ · OEM source checked |
DMP Flex 350
More published specifications and source notes
| Published detail | Evidence |
|---|---|
| 3D Systems DMP Flex 350 | 275 x 275 x 420 mm (height incl. build plate); 500 W fiber standard; layers min 5 um, typical 30/60/90 umOEM ↗ · Source reviewed |
| Published build envelope | 275 x 275 x 420 mm, height inclusive of build plate.OEM ↗ · OEM source checked |
| Layer thickness | Adjustable; minimum 5 µm, typical values 30, 60 and 90 µm.OEM ↗ · OEM source checked |
| Machine dimensions / footprint | 2360 x 2400 x 2870 mm (W x D x H), uncrated.OEM ↗ · OEM source checked |
| Machine weight | Approximately 4200 kg, uncrated.OEM ↗ · OEM source checked |
| Gas / atmosphere — stated scope | Argon supply, 4–6 bar; OEM facility requirement.OEM ↗ · OEM source checked |
| Manufacturer positioning | 3D Systems positions DMP Flex 350 for low-to-medium production and material changeover.OEM ↗ · OEM source checked |
These public specifications cannot establish a throughput, finished-part quality, support or price winner. Confirm usable envelope, exact alloy and process parameters, effective build time, finishing and local service for both options.