Independent metal AM
EOS M 400-4 vs DMP Factory 500
Start with the differences that could affect your part. Confirm the complete configuration with each supplier.
The big difference
- DMP Factory 500 has the larger published build-space volume.
- Both use Powder bed fusion · laser powder bed fusion (LPBF).
- These specifications alone cannot tell us which machine will make a given part faster or cheaper.
Side by side
| Question | EOS M 400-4 | DMP Factory 500 |
|---|---|---|
| Quick description | LPBF machine; compare published build space and laser configuration below. | LPBF machine; compare published build space and laser configuration below. |
| Process | Powder bed fusion · laser powder bed fusion (LPBF) | Powder bed fusion · laser powder bed fusion (LPBF) |
| Build size | 400 x 400 x 400 mm (incl. build platform) | build volume 500 x 500 x 500 mm (height incl. build plate) |
| Energy / lasers | 4 × 400 W | build volume 500 x 500 x 500 mm (height incl. build plate); 3 lasers |
| Feedstock | Metal powder | Metal powder |
| Machine status | Availability unconfirmed | Availability unconfirmed |
| Public price | Current quote required | Current quote required |
Published build-space comparison
EOS M 400-4400 × 400 × 400 mm
DMP Factory 500500 × 500 × 500 mm
Proportional X and Z dimensions. Depth is listed in the numbers. Nominal envelopes are not usable part space; see configuration and platform caveats below.
Build size is the maximum published physical space. Energy or laser counts describe the machine configuration; they do not prove a throughput winner.
What do these differences actually mean?
A difference may matter when your part size, material, production plan or process qualification requires it. Confirm the exact application with both suppliers; this page does not declare a winner.
What public specs cannot tell you
Real throughputYour geometry, orientation, parameters and finishing route matter.
Actual yieldPublished specs do not tell you your accepted-part rejection rate.
Total installed priceInstallation, training, service, software and options require a current quote.
Finished-part costPrinting is only one part of the complete accepted-part route.
Service qualityLocal response, parts availability and support experience need supplier validation.
Qualified application fitPublic specs cannot approve your material, parameters, tolerances or inspection plan.
EOS M 400-4
| Capability | Source-backed detail |
|---|---|
| EOS M 400-4 build volume | 400 x 400 x 400 mm (incl. build platform)OEM ↗ · OEM source checked |
| EOS M 400-4 lasers | Yb-fiber; 4 x 400 W; four 250 x 250 mm areas with 50 mm overlapOEM ↗ · OEM source checked |
More published specifications and source notes
| Published detail | Evidence |
|---|---|
| EOS M 400-4 power | max 45.0 kW / typical 22.0 kW; supply 3 x 50 AOEM ↗ · OEM source checked |
| EOS M 400-4 footprint/weight | 5140 x 2490 x 2625 mm; approx 4900 kgOEM ↗ · OEM source checked |
| Materials — OEM scope | OEM-listed examples: AlSi10Mg, IN718, IN625, 316L, Ti64 and MS1. Exact alloy and process qualification still require confirmation.OEM ↗ · OEM source checked |
| Layer thickness | Material-specific examples: AlSi10Mg 40/80 µm; IN625 80 µm; Ti64 60 µm. These are published parameter choices, not a universal machine range.OEM ↗ · OEM source checked |
| Machine weight | Approximately 4900 kg.OEM ↗ · OEM source checked |
| Manufacturer positioning | EOS presents the M 400-4 as a quad-laser production system.OEM ↗ · OEM source checked |
| Gas / atmosphere — stated scope | Inert gas supply: 7,000 hPa; 15 m³/h (102 psi; 706 ft³/h).OEM ↗ · OEM source checked |
| Published print speed / throughput — stated basis | OEM data-sheet build-rate table, material-specific: up to 172.8 cm³/h (EOS Titanium Ti64 Grade 5 / Grade 23); 172.8 cm³/h (EOS Titanium TiCP); 120.96 cm³/h (EOS StainlessSteel 316L); 106.8 cm³/h (EOS MaragingSteel MS1); 100.8 cm³/h (EOS Aluminium AlSi10Mg); 74.9 cm³/h (EOS NickelAlloy IN939); 60.4 cm³/h (EOS NickelAlloy IN718; EOS NickelAlloy HX); 55.3 cm³/h (EOS CaseHardeningSteel 20MnCr5).OEM ↗ · OEM source checked |
DMP Factory 500
More published specifications and source notes
| Published detail | Evidence |
|---|---|
| 3D Systems DMP Factory 500 | build volume 500 x 500 x 500 mm (height incl. build plate); 3 lasersOEM ↗ · Source reviewed |
| Published build envelope | 500 x 500 x 500 mm, height inclusive of build plate; check material printing specifications.OEM ↗ · OEM source checked |
| Materials — OEM scope | OEM brochure lists LaserForm Ni718 (A), Ti Gr23 (A), AlSi10Mg (A) and Certified HX; other materials on request.OEM ↗ · OEM source checked |
| Layer thickness | Adjustable from 5 to 200 µm, per OEM printer-module table.OEM ↗ · OEM source checked |
| Machine dimensions / footprint | Printer module, uncrated: 3010 x 2350 x 3160 mm (W x D x H).OEM ↗ · OEM source checked |
| Machine weight | Printer excluding removable print module: 8232 kg uncrated. Removable print module excluding powder: 1318 kg. These are separate masses.OEM ↗ · OEM source checked |
| Gas / atmosphere — stated scope | Argon supply: 6–10 bar; printer-module facility requirement.OEM ↗ · OEM source checked |
| Manufacturer positioning | 3D Systems presents a modular system with separate printing and powder-handling stations.OEM ↗ · OEM source checked |
These public specifications cannot establish a throughput, finished-part quality, support or price winner. Confirm usable envelope, exact alloy and process parameters, effective build time, finishing and local service for both options.