Machine evidence
SPEE3D LightSPEE3D
Decision context / editorial guidance
Screen the application.
Then qualify the process.
Worth investigating if: your supplier can demonstrate the required alloy, geometry and finished-part specification on the quoted SPEE3D LightSPEE3D configuration.
Do not buy on this page alone: a published envelope or machine configuration does not establish repeatability, accepted-part cost or local support.
Editorial purchasing guidance, not a verified recommendation for a particular application.
Published geometry / not guaranteed part fit
Schematic of the cylindrical build space as published. The stated diameter constrains the part cross-section; supports and clearance reduce usable space.
Compare this machine →Manufacturer listing reviewed · confirm configuration
At a glance
What is it?
SPEE3D LightSPEE3D is an industrial metal 3D printer using Cold spray.
How does it print?
Cold spray
When might I consider it?
Which is the better fit depends on your part, material, required output and qualified process.
What public specs cannot tell you: finished-part speed, cost, quality or fit for your exact application.
New to AM? Start with the 5-minute guide →
Cold spray additive · cold spray · SPEE3D
Availability and review notes
Source review: . Source-specific review dates appear beside each fact.
Published capabilities
| Capability | Source-backed detail |
|---|---|
| Build envelope | Ø350 x 300 mm maximum part size; cylindrical, not XYZOEM ↗ · Source reviewed |
More published specifications and source notes
| Published detail | Evidence |
|---|---|
| Maximum part weight | Approximately 5 kgOEM ↗ · Source reviewed |
| Materials | Copper and aluminiumOEM ↗ · Source reviewed |
| Machine footprint | 3.2 x 1.4 x 2.4 m (L x W x H), doors closedOEM ↗ · Source reviewed |
| Weight | Approximately 2200 kgOEM ↗ · Source reviewed |
| Deposition rate | Up to 100 g/min; deposition rate, not finished-part throughputOEM ↗ · Source reviewed |
| Compressed air | Minimum 35 bar, 1.0 m³/minOEM ↗ · Source reviewed |
| Manufacturer positioning | SPEE3D presents LightSPEE3D as its smallest integrated metal printer for parts up to approximately 5 kg.OEM ↗ · OEM source checked |
What still needs a supplier answer
| Purchasing question | Evidence gap |
|---|---|
| All-in delivered machine price | Current quote required |
| Build time for your part | Not verified for your geometry |
| Alloy and parameters | Confirm the exact qualified combination |
| Application fit | Confirm tolerances, finishing, inspection and local support |
Source review dates identify when the cited material was reviewed. A source review is not a performance test; genuine third-party corroboration is identified separately.
Prepare a useful quote request
Send your exact alloy, dimensions, orientation, supports, inspection criteria and finishing route. Ask for usable build space and effective build time for that configuration. Include installation, training, service, software, gas supply and qualification in the delivered quote. Unverified fields on this page can be used as questions to confirm directly with the manufacturer before purchase.